How do I deactivate a resource?

Last edited: October 23, 2026

Deactivation changes a resource’s Active status without deleting its record or historical revisions. This procedure applies only to operators authorized to change resource status in the applicable library.

Procedure

  1. Sign in to GCO2 with an account authorized to manage resource status.
  2. Open Resource Management and locate the intended resource. Confirm the library, title and current Active status.
  3. Select the checkbox for the correct resource. For multiple resources, review each selected record before proceeding.
  4. Choose Deactivate selected from the available status actions.
  5. Use the interface’s confirmation control to apply the selected action. Do not proceed if the list contains a resource that should remain Active.
  6. Review the outcome notice and, when offered, open View Audit Results to inspect each resource’s result and any warning.
  7. Use the status filter to locate the resource again and confirm it now appears as Inactive.

Important notes

Verification

Confirm the resource’s Inactive state and review the available audit results. If a selected row was skipped or blocked, investigate its reported reason rather than assuming the entire batch succeeded.

Related Resource Management procedures

How do I manage the Help documents?

  1. Open BetterDocs
  2. Select the document to modify or create a new one
  3. Choose the appropriate Categories
  4. Modify or add content.
  5. Publish the document.
  6. Verify that it appears in the expected location.

How do I edit a resource?

Last edited: October 23, 2026

Authorized Resource Management operators can update resource details. Changing descriptive fields is different from uploading a file revision or selecting the Active version.

Procedure

  1. Sign in with an account authorized to manage the intended resource.
  2. Open GCO2 and select Resource Management.
  3. Locate the intended resource using its library, filters or search. Confirm the title and existing status before changing anything.
  4. Select Edit on the correct resource row.
  5. Review the current resource type, library, category, audience and descriptive information. Make only the approved changes using fields available in the form.
  6. If the change involves a revised file, follow the separate upload a resource revision procedure. Review existing versions and do not overwrite or silently discard historical revisions.
  7. Select Update Resource. If a validation notice appears, review and correct the indicated fields.
  8. Return to the list, reopen the record and verify the saved metadata, revision inventory and Active state.

Important notes

Verification

Check the updated record against the approved changes and review available audit results where applicable.

Related Resource Management procedures

How do I create a resource?

Last edited: October 23, 2026

This procedure is for signed-in operators whose assigned permissions allow them to create a resource in the applicable library. It does not grant permissions to a role that lacks them.

Procedure

  1. Sign in to the website using an authorized account.
  2. Open the GCO2 administrative interface and select Resource Management.
  3. Select Add New to open the resource form.
  4. Select the appropriate Resource Type and Library. Check that the intended audience, category and any grouping are appropriate for the publication.
  5. Enter a descriptive title and complete the fields displayed for the selected resource type. Supply the required file, media or external address using the controls provided by the form.
  6. Review the resource’s Active/Inactive state and any version information before saving. Do not assume that uploading a newer file will automatically select it as Active.
  7. Select Save Resource. If validation fails, correct the identified fields and save again.
  8. Return to Resource Management, locate the new record and confirm its title, type, library, audience and status.

Important notes

Verification

Reopen the saved resource and confirm that its classification, intended audience, file or destination and Active state match the approved publication decision.

Related Resource Management procedures

Security guidance

Before uploading or publishing resources, read Security — Document Security & Publication Guidance.

← Back to Help

How do I review an audit history?

Last edited: October 23, 2026

← Back to Help

Some governed GCO2 workflows provide an audit or history view showing changes to records and the people or accounts responsible for them.

Procedure

  1. Sign in using an account authorized to view the relevant administrative workflow.
  2. Open WP Admin and GCO2.
  3. Locate the record or request you need to review.
  4. Open its available History, Audit or Details view.
  5. Review the recorded date and time, actor, action and change details.
  6. Compare the recorded change with the current state of the record.
  7. Use an available Copy or Print action if you need to retain supporting information.

Important notes

Verification

Confirm that the audit belongs to the intended record and that its entries explain the action being reviewed.

How do I find a form?

Last edited: October 23, 2026

← Back to Help

The website provides forms and related documents for different activities. Use the Forms section to locate the document appropriate to your task.

Procedure

  1. Open the Royal Arch Masons Ontario website.
  2. Select Forms from the available website navigation.
  3. Review the available form categories or listings.
  4. Locate the form associated with your task.
  5. Open or download the available form.
  6. Read the form instructions before completing or submitting it.

Important notes

Verification

Confirm that the form title and purpose match your task and that you know how and where the completed form must be submitted.

How do I use the Directory?

Last edited: October 23, 2026

← Back to Help

The Directory helps authorized users locate available Chapter, District and organizational information. The information you can see may depend on your account.

Procedure

  1. Sign in to the website if the information you need requires an account.
  2. Select Directory from the website navigation.
  3. Choose the available directory section relevant to your search.
  4. Use the available listing, search or filtering controls to find the Chapter, District or Person you need.
  5. Open the appropriate entry to review its available details.
  6. Check that the entry belongs to the intended Chapter or District before using its information.

Important notes

Verification

Confirm that the directory entry identifies the intended Chapter, District or Person and that the available details match your purpose.

How do I upload a resource revision?

Last edited: October 23, 2026

← Back to Help

Authorized Resource Management operators can add a revised file while retaining earlier versions. Uploading a revision and selecting the Active version are separate decisions.

Procedure

  1. Sign in with an account authorized to manage the applicable resource.
  2. Open WP Admin and navigate to GCO2 Resource Management.
  3. Locate the resource in its correct library and confirm its resource type.
  4. Review the existing revision inventory, including filenames, version numbers and the current Active selection.
  5. Choose the available action to add or upload a revision.
  6. Select the intended file and provide its version information where required.
  7. Review any warning about an older version, duplicate version or different file using an existing version number.
  8. Save the revision using the authorized workflow.
  9. Review the available revisions and explicitly select the version that should be Active, or retain no Active version where permitted.
  10. Reopen the resource and verify that the correct file and Active state were saved.

Important notes

Verification

Confirm that the revision inventory contains the newly uploaded file alongside retained earlier versions. Check the explicitly selected Active version and the available audit details.

Related Resource Management procedures

How do I find a resource?

Last edited: October 23, 2026

← Back to Help

The website provides resource libraries containing documents and other information for visitors and authorized Companions. Available resources depend on the library and any applicable access restrictions.

Procedure

  1. Open the Royal Arch Masons Ontario website.
  2. Locate Resources or the appropriate document library through the website navigation.
  3. Choose the library or resource type relevant to your task.
  4. Browse the available resources and use any provided filters or search tools.
  5. Select the resource you want to view.
  6. Open or download its available published file.

Important notes

Verification

Confirm that you have opened the intended resource and that its title, library and available version are appropriate for your purpose.

Related Resource Management procedures

How do I identify an existing Person?

Last edited: October 23, 2026

← Back to Help

Before creating a Person record for a Companion Request, check whether the individual already has a record in the governed Members Directory.

Procedure

  1. Open the Companion Request you are authorized to process.
  2. Review the submitted name, Chapter and other identifying information.
  3. Use the available existing-Person selection or matching workflow.
  4. Compare possible matches against the request and any supporting information.
  5. Check for related historical submissions where the interface provides that information.
  6. Select an existing Person only when the available evidence supports the match.
  7. If no reliable match exists, use the authorized Create Person workflow rather than forcing an uncertain selection.
  8. Review the saved result and confirm that the request is associated with the intended Person.

Important notes

Verification

Confirm that the correct Person identity is associated with the request, that the available Chapter information is consistent, and that the processing history records the completed action.

How do I review a Companion Request?

Last edited: October 23, 2026

← Back to Help

Companion Requests allows authorized operators to review requests for website access and determine the appropriate next processing step.

Procedure

  1. Sign in with an authorized Back-End account and open GCO2.
  2. Open Companion Requests and review the Submitted queue.
  3. Select the request you want to examine.
  4. Review the submitted name, Chapter information and other available details.
  5. Check whether the request may relate to an existing Person or another submission.
  6. Correct submitted details where the authorized workflow permits it.
  7. Choose an available processing action only after confirming that the request and intended action are appropriate.
  8. Save the permitted changes and reopen the request to verify the result.

Important notes

Verification

Confirm the request details, current queue classification and available history. If a processing action was completed, verify that the resulting state reflects the intended decision.

How do I select a Chapter?

Last edited: October 23, 2026

← Back to Help

Some GCO2 administration workflows allow authorized users to select the Chapter whose records they need to review or manage.

Procedure

  1. Sign in with an authorized administrative account.
  2. Open WP Admin and then GCO2.
  3. Open the management workflow relevant to your task.
  4. Locate the Chapter selector, where that workflow provides one.
  5. Select the Chapter you need to work with.
  6. Confirm the Chapter shown in the management interface before reviewing or modifying any record.

Important notes

Verification

Check that the selected Chapter name is correct and that the displayed records belong to the intended Chapter before making a change.

How do I access GCO2?

Last edited: October 23, 2026

← Back to Help

GCO2 is the governed administration interface used for authorized website management workflows.

Procedure

  1. Sign in using your approved website account.
  2. Locate WP Admin in the signed-in primary navigation.
  3. Open WP Admin.
  4. Locate the GCO2 administration entry.
  5. Open GCO2 and choose the available management workflow relevant to your task.

Important notes

Verification

Confirm that GCO2 opens and that the expected management areas are available. If an action is disabled or missing, do not bypass the authorization controls.

How do I sign in?

Last edited: October 23, 2026

← Back to Help

Sign in to access the website features available to your account.

Procedure

  1. Open the Royal Arch Masons Ontario website.
  2. Select the website sign-in or login option.
  3. Enter the credentials associated with your approved account.
  4. Complete the sign-in process.
  5. Check the signed-in navigation to confirm that your account is recognized.

Important notes

Verification

Confirm that the signed-in menu is displayed and that you can access the functions appropriate to your account.